|
Car
Care Products
Specialty
Items
|
Car
Care Tip
"Cleaning
windows with out streaks is easy. First of
all always use streak free window cleaner, and
two towels. Use the first towel for
initial wiping and the other towel to polish or
dry the glass. The second towel removes
the streaks, and it should never be wet.
By attention to the edges and corners of the
glass. "
|
|
Links |
|
 |
The ShMITT
Multi-purpose Foam Mitt
|
|
ShMITT is a multi-purpose foam mitt that utilizes a
ultra soft soap-retaining foam to wash the car.The ShMITT
utilizes material that has already been proven safe
and effective on vehicle surfaces because it’s the
same foam found in Edge 2000 pads.
White/Yellow
Wash ShMITT: Wash
with the gentle white foam front. This is the same
foam found in the Edge white ultrafine polishing pad.
The soft, closed-cell foam sheds dirt, rather than
retaining it. Dirty water is able to escape from under
the mitt thanks to the convoluted wave surface. Since
the dirt is not rubbed into the paint, wash-induced
swirls are greatly reduced
Because
the ShMITT is made of smooth foam, it will not leave
threads or fibers behind on the vehicle. The solid
foam mitt maintains its shape through countless uses.
The beveled edge allows the ShMITT to clean in
crevices and seams easily.
The
backside of this ShMITT is made from coarse yellow
foam. This foam works well as a spot scrubber to
remove insects and tar from your vehicle’s exterior.
Use it on lower body panels and problem areas as you
wash your vehicle.
Yellow/White
Interior Shmitt: Clean interior surfaces
with this slightly coarser yellow foam. The yellow
foam can be used to safely clean leather, vinyl,
dashboards, and door panels. Since these materials are
often textured, the light scrubbing ability of the
yellow foam expertly cleans uneven surfaces. The
beveled edge allows you to effectively clean the seams
and crevices of your vehicle’s interior. The mitt
design makes it quick and easy to clean curves,
corners, concave spaces, and crevices without dropping
your ShMITT.
The
white backside of the Interior ShMITT is the same
soft, absorbent foam found in the original Wash ShMITT.
This smooth, soft foam applies leather conditioners
and protectants in a thin, even coat with no mess.
Easily follow the curves of interior surfaces with the
comfortable ShMITT to apply products all over, even
the sides of the seats that were formerly hard to
• sheds grit to prevent scratching
• beveled design reaches tight spaces
• ergonomically and environmentally sound
for more details Foam holds suds better than
wool (how absorbent is a sweater?). When you squeeze
the ShMitt, you instantly replenish the cleaning fluid
- so you spend less time at the bucket and more time
washing the car
BETTER
• Foam specifically engineered
for gentle cleaning
• Convoluted Edge Wave© surface
• Patented Edge® bevel design enables you to reach
narrow spaces
• Holds suds better than wool
• No sloppy corners to snag, bunch up or fling
fluids
• Sheds grit easily - grit doesn't work into the
pad, so it’s much less
likely to scratch paint
• Foam resists deterioration so texture stays
consistent
• Won’t rot or mildew
• 4 versatile models, one for every task
The ShMitt is made from gentle yet durable
polyester foam. Unlike wool or fabrics, the foam
retains its texture and softness through repeated
uses. Above: a new ShMitt, and one that has been used
to was more than 60 cars by one of our customers.
EASIER
• Fits like a glove, not
a bag
• Soft poly foam is comfortable
next to your skin
• Ergonomic design reduces
carpal tunnel stress
CLEANER
•
No animals are affected in any way
• Saves water – rinses clean in seconds
• Environmentally responsible manufacturing:
all materials are recycled

|